The apply qos-local-id command sets the QoS local ID.
The undo apply qos-local-id command cancels the configuration.
By default, no QoS local ID is set.
| Parameter | Description | Value |
|---|---|---|
| qos-local-id | Specifies the QoS local ID. | The value is an integer ranging from 1 to 4095. |
Usage Scenario
The QoS local ID is a local identifier of QoS. In actual applications, you can set the QoS local ID in the route-policy, and add the command that matches the QoS local ID in the QoS policy. The QoS local ID set in the route-policy is delivered to the Forwarding Information Base (FIB) table. During packet forwarding, the system obtains the QoS local ID from the FIB table and applies the related QoS policy according to the QoS local ID.
Configuration Impact
The parameter qos-local-id is one of the three types of QoS parameters that can be configured by QoS Policy Propagation Through the Border Gateway Protocol (QPPB). The apply qos-local-id command is mutually exclusive with the apply behavior and apply ip-precedence (route-policy view) commands.