c-rp advertisement-interval (IPv4)

Function

The c-rp advertisement-interval command sets the interval for a C-RP to send Advertisement messages.

The undo c-rp advertisement-interval command restores the default value.

Format

c-rp advertisement-interval interval

undo c-rp advertisement-interval

Parameters

Parameter	Description	Value
interval	Specifies the interval for a C-RP sends Advertisement messages.	The value ranges from 1 to 65535, in seconds. By default, the value is 60.

Views

PIM view

Default Level

2: Configuration level

Usage Guidelines

By default, the interval for a C-RP to send advertisement messages is 60s.

All C-RPs in a PIM-SM domain periodically send Advertisement messages to the same BootStrap router (BSR). The BSR can collect the integrated Rendezvous Point (RP)-Set.

This command functions in the same way as the c-rp interface-type interface-number advertisement-interval adv-interval command, except for the function range. The c-rp advertisement-interval interval command is global and valid for all FWs, whereas the c-rp interface-type interface-number advertisement-interval adv-interval command is valid only for a specified interface.

The system prefers the configuration done using the c-rp interface-type interface-number advertisement-interval adv-interval command. When the c-rp interface-type interface-number advertisement-interval adv-interval command is not run, the configuration done using the c-rp advertisement-interval interval command is used.

Example

# Set the interval for a C-RP to send Advertisement messages to 30s.

<sysname> system-view
[sysname] multicast routing-enable
[sysname] pim
[sysname-pim] c-rp GigabitEthernet 0/0/1
[sysname-pim] c-rp advertisement-interval 30