display alarm manual-clear

Function

The display alarm manual-clear command queries the information about alarms in an alarm queue cleared manually.

Format

display alarm manual-clear

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

After running the mask manual-clear alarm command to enable the function of masking manually-deleted alarms and running the clear alarm active { all | sequence-number sequence-number } command or use hwAlarmActiveTable of the MIB table to delete the information about active alarms, run this command to query the information about alarms cleared manually.

Example

# Query the information about alarms in an alarm queue cleared manually.

<sysname> display alarm manual-clear

A/B/C/D/E/F/G/H/I/J
A=Sequence, B=RootKindFlag(Independent|RootCause|nonRootCause)
C=Generating time, D=Clearing time
E=ID, F=Name, G=Level, H=State
I=Description information for locating(Para info, Reason info)
J=RootCause alarm sequence(Only for nonRootCause alarm)

  2/Independent/2016-05-04 10:38:46-08:00/-/0xff14280c/hwEntityOffline/Major/Start/ OID 1
.3.6.1.4.1.2011.5.25.129.2.1.13 Physical entity changed to the offline state. (E
ntityPhysicalIndex=16842752, BaseTrapSeverity=5, BaseTrapProbableCause=69120, Ba
seTrapEventType=5, EntPhysicalContainedIn=16777216, EntPhysicalName="LPU slot 1"
, RelativeResource="", ReasonDescription="Because of get offline message, the en
tity of SLOT1 changed to offline state")

**Table 1** Description of the **display alarm manual-clear** command output
Item	Description
Sequence	Alarm SN
RootKindFlag	Root or correlative alarm flag Independent: an alarm on which correlation analysis is not performed. RootCause: root alarm. nonRootCause: correlative alarm.
Generating time	Alarm generation time
Clearing time	Alarm clearing time
ID	Alarm ID
Name	Alarm name
Level	Alarm level
State	Alarm status Start: An alarm starts. End: An alarm ends.
Description information for locating	Alarm description
RootCause alarm sequence(Only for nonRootCause alarm)	Root alarm SN (for correlative alarms only)