display default-parameter mpls ldp

Function

The display default-parameter mpls ldp command displays the default MPLS LDP configurations.

Format

display default-parameter mpls ldp

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

To view the default MPLS LDP configurations, run the display default-parameter mpls ldp command.

Example

# Display the default MPLS LDP configurations.

<sysname> display default-parameter mpls ldp

 LDP Default Values:
 ----------------------------------------------------------
          Protocol version               : V1
          Graceful restart               : Off
            Neighbor liveness(sec)       : 600
            FT reconnect timer(sec)      : 300
            Recovery timer(sec)          : 300
          MTU signaling                  : On
          Label retention mode           : Liberal
          Label distribution mode        : Ordered
          Label advertisement            : DU
          Local hello-hold timer(sec)    : 15
          Remote hello-hold timer(sec)   : 45
          Keepalive-hold timer(sec)      : 45
          Backoff timer init(sec)        : 15
          Backoff timer max(sec)         : 120
          IGP-Sync delay timer(sec)      : 10
          Graceful delete                : Off
          Graceful delete timer(sec)     : 5
          Capability-announcement        : Off
         mLDP MBB Capability            : Off
            Wait-ack timer(sec)          : 10
            Switch-delay timer(ms)       : 100
          mLDP P2MP Capability           : Off
          mLDP MP2MP Capability          : Off
          Label withdraw-delay           : Off
            Withdraw-delay timer(sec)    : 5
          Send LSP down reason           : Off
          Ingress LSP Load-balance Num   : 4
          Transit LSP Load-balance Num   : 1
          Smart-policy Ingress           : Off
          Smart-policy Auto-dod-request  : Off
          Label default-route            : Off
 ----------------------------------------------------------

**Table 1** Description of the **display default-parameter mpls ldp** command output
Item	Description
Protocol version	LDP version number.
Graceful restart	Whether GR is enabled. The default value is "Off", indicating that GR is disabled.
Neighbor liveness(sec)	Value of the LDP Neighbor Liveness timer (in seconds).
FT reconnect timer(sec)	Value of the Reconnect timer (in seconds) of an LDP session.
Recovery timer(sec)	Value of the Recovery timer (in seconds) of an LDP LSP(Label Switch Path).
MTU signaling	Whether maximum transmission unit (MTU) signaling is enabled. The default value is "On", indicating that the private MTU TLV is sent.
Label retention mode	Default LDP label retention mode, including: Liberal Conservative The default value is "Liberal".
Label distribution mode	Default LDP label distribution mode, including: Ordered Independent The default value is "Ordered".
Label advertisement	Default LDP label advertisement mode, including: DU DoD The default value is "DU".
Local hello-hold timer(sec)	Value of the local Hello hold timer (in seconds)
Remote hello-hold timer(sec)	Value of the remote Hello hold timer (in seconds).
Keepalive-hold timer(sec)	Value of the Keepalive hold timer (in seconds) of LDP local and remote sessions.
Backoff timer init(sec)	Initial value of the Exponential backoff timer (in seconds).
Backoff timer max(sec)	Maximum value of the Exponential backoff timer (in seconds).
IGP-Sync delay timer(sec)	LDP-Interior Gateway Protocol (IGP) synchronization timer (in seconds).
Graceful delete	Whether graceful deletion is enabled. The default value is "Off", indicating that graceful deletion is disabled.
Graceful delete timer(sec)	Graceful delete timer (in seconds).
Capability-announcement	Whether the LDP dynamic advertisement function is enabled. The default value is "Off", indicating that this function is disabled.
mLDP MBB Capability	Whether the multipoint extensions for LDP (mLDP) make-before-break capability is enabled. The default value is "Off", indicating that mLDP make-before-break is disabled.
Wait-ack timer(sec)	The default value of the time for waiting for an MBB ACK Notification message.
Switch-delay timer(ms)	The default value of the delay time for switching traffic to an MBB LSP.
mLDP P2MP Capability	Whether mLDP point-to-multipoint (P2MP) is enabled global. The default value is "Off", indicating that mLDP P2MP is disabled globally.
mLDP MP2MP Capability	Whether mLDP multipoint-to-multipoint (MP2MP) is enabled global. The default value is "Off", indicating that mLDP MP2MP is disabled globally.
Label withdraw-delay	Whether the label withdraw delay function is enabled. The default value is "Off", indicating that this function is disabled.
Withdraw-delay timer(sec)	Default value of the label withdraw delay timer (in seconds).
Send LSP down reason	Whether a node is enabled to report the fault location and cause to the ingress. The default value is "Off", indicating that the faulty node is disabled from reporting the fault cause to the ingress.
Ingress LSP Load-balance Num	Default maximum number of equal-cost LDP LSPs that can be established on the ingress.
Transit LSP Load-balance Num	Default maximum number of equal-cost LDP LSPs that can be established on a transit node.
Smart-policy Ingress	Smart LDP ingress policy
Smart-policy Auto-dod-request	Smart LDP request policy
Label default-route	Policy for assigning labels to default IGP routes