display default-parameter mrm

Function

The display default-parameter mrm command displays the default configurations for multicast routing management (MRM).

Format

display default-parameter mrm

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

This command displays only the default configurations, regardless of whether MRM parameters are changed.

Example

# Display default configurations for MRM.

<sysname> display default-parameter mrm
  System View Default Configurations:
  -----------------------------------
  Load splitting rule: disabled
  Load-splitting-timer: 1800
  Route selection rule: preference-preferred
  Multi-topology: disabled

  Interface View Default Configurations:
  --------------------------------------
  Minimum TTL: 1
  Reject inbound data: disabled
  Reject outbound data: disabled
  multicast load-splitting weight: 1

**Table 1** Description of the **display default-parameter mrm** command output
Item	Description
System View Default Configurations	Indicates the default configurations in the system view.
Load splitting rule	Indicates whether multicast load splitting is configured.
Load-splitting-timer	Indicates the default value of the multicast load splitting balancing timer.
Route selection rule	Indicates the Reverse Path Forwarding (RPF) route selection rule. By default, RPF route selection is based on the preference of the routing protocol.
Multi-topology	Indicates whether the multi-topology is configured.
Interface View Default Configurations	Indicates the default configurations in the interface view.
Minimum TTL	Indicates the minimum TTL value for multicast packet forwarding.
Reject inbound data	Indicates whether the interface is disabled from receiving multicast packets.
Reject outbound data	Indicates whether the interface is disabled from forwarding multicast packets.
multicast load-splitting weight	Indicates the multicast load splitting weight.