display default-parameter msdp

Function

The display default-parameter msdp command displays default configurations for Multicast Source Discovery Protocol (MSDP).

Format

display default-parameter msdp

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

This command displays only default configurations, regardless of whether the MSDP parameters have been changed from the defaults.

Example

# Display default configurations for MSDP.

<sysname> display default-parameter msdp
  MSDP View Default Configurations:
  ---------------------------------
  Cache-sa-enable: enabled
  Msdp description:
  Encap-data-enable: disabled
  Request-sa-enable: disabled
  Sa-request-policy: disabled
  Sa-policy: disabled
  Connect-retry-period: 30s
  Minimum TTL: 0

**Table 1** Description of the **display default-parameter msdp** command output
Item	Description
MSDP View Default Configurations	Indicates the default configurations in the MSDP view.
Cache-sa-enable	Indicates whether Source Active (SA) cache is enabled.
Msdp description	Indicates whether MSDP peer description is configured.
Encap-data-enable	Indicates whether encapsulating multicast data packets into the SA message is enabled.
Request-sa-enable	Indicates whether to send an SA Request message immediately after a Join message is received.
Sa-request-policy	Indicates whether the filtering rule for responding to the SA Request message is configured.
Sa-policy	Indicates whether the filtering rule for receiving or forwarding the SA message is configured.
Connect-retry-period	Indicates the time to retry to set up a TCP connection between MSDP peers.
Minimum TTL	Indicates the TTL value of the multicast data packet encapsulated in the SA message.