ipv6 send local-certificate

Function

The ipv6 send local-certificate command configures the certificate for an interface.

The undo ipv6 send local-certificate command cancels the certificate for an interface.

Format

ipv6 send local-certificate filename cert-filename

undo ipv6 send local-certificate

Parameters

Parameter	Description	Value
cert-filename	Specifies the name of the local certificate.	It is a string of 1 to 63 characters.

Views

Ethernet interface view, Ethernet sub-interface view, Eth-Trunk interface view, Eth-Trunk sub-interface view, VLANIF interface view, BDIF interface view

Default Level

2: Configuration level

Usage Guidelines

After the certificate for the interface is configured, the interface replies the CPA message containing the certificate information to the CPS message sent by the host. After receiving the CPA message, the host authenticates the certificate. The host regards the router as the default one only when the certificate passes the authentication.

By default, the interface is not configured with a certificate.

Example

# Configure local certificate local.cer for GigabitEthernet 0/0/1.

<sysname> system-view
[sysname] interface gigaitethernet 1/0/1
[sysname-GigabitEthernet 0/0/1] ipv6 send local-certificate filename local.cer