lacp system-priority

Function

The lacp system-priority command configures a Link Aggregation Control Protocol (LACP) system priority.

The undo lacp system-priority command restores the default LACP system priority.

The default LACP system priority is 32768.

Format

lacp system-priority priority

undo lacp system-priority

Parameters

Parameter	Description	Value
priority	Specifies an LACP system priority.	The value is an integer ranging from 0 to 65535. The default value is 32768. The smaller the LACP priority value, the higher the priority.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

When running the lacp priority-command-mode command, note the following points:

If you specify default in the command, the LACP system priority and LACP interface priority configurations still use the same command (lacp priority priority).
If you specify system-priority in the command, run the lacp system-priority priority command to configure the LACP system priority and run the lacp priority priority command to configure the LACP interface priority.

Prerequisites

The LACP system priority configuration mode has been set to system-priority using the lacp priority-command-mode system-priority command in the system view.

Example

# Set the LACP system priority to 10.

<sysname> system-view

[sysname] lacp priority-command-mode system-priority

[sysname] lacp system-priority 10