network (RIP)

Function

The network command enables RIP for the interface on the specified network segment.

The undo network command disables RIP for the interface on the specified network segment.

By default, RIP is disabled for the interface on the specified network segment.

Format

network network-address

undo network network-address

Parameters

Parameter	Description	Value
network-address	Specifies the network address on which RIP is enabled. It must be the address of the natural network segment.	The value is in dotted decimal notation.

Views

RIP view

Default Level

2: Configuration level

Usage Guidelines

An interface can be associated with only one RIP process.

If one sub-interface's network segment of an interface with multiple sub-interface IP addresses has been associated with an RIP process, the interface cannot be associated with any other RIP processes.

To prevent security risks, do not set network 0.0.0.0.

Example

# Enable RIP routes for the interface on the specified network segment.

<sysname> system-view

[sysname] rip 1

[sysname-rip-1] network 10.0.0.0