ntp-service broadcast-client

Function

The ntp-service broadcast-client command configures the NTP broadcast client mode.

The undo ntp-service broadcast-client command cancels the NTP broadcast client mode.

By default, the NTP broadcast client mode is not configured.

Format

ntp-service broadcast-client

undo ntp-service broadcast-client

Parameters

None

Views

Ethernet interface view, Ethernet sub-interface view, Eth-Trunk interface view, Eth-Trunk sub-interface view, Tunnel interface view, Dialer interface view, VLANIF interface view, Loopback interface view

Default Level

2: Configuration level

Usage Guidelines

The local device automatically runs the broadcast client mode once being specified to receive the NTP broadcast messages on the current interface.

Example

# Enable GE0/0/0 to receive NTP broadcast messages.

<sysname> system-view
[sysname] interface GigabitEthernet 0/0/0
[sysname-GigabitEthernet0/0/0] ntp-service broadcast-client