The pim hello-option holdtime command sets the timeout period during which the PIM interface waits to receive the Hello message from its neighbor.
The undo pim hello-option holdtime command restores the default value of the timeout.
| Parameter | Description | Value |
|---|---|---|
| interval | Specifies the timeout period during which the PIM interface waits to receive Hello messages from its neighbor. | The value is an integer that ranges from 1 to 65535, in seconds. |
By default, the timeout period during which the PIM interface waits to receive the Hello message from its neighbor is 105 seconds.
This command functions in the interface view in the same way as the hello-option holdtime command in the PIM view, except for the view. By default, if the configuration on the interface is not done, the value configured in the PIM view is used; otherwise, the value configured in the interface view is used.
You must run the multicast routing-enable command to enable the multicast function before using the command.