rip bfd block

Function

The rip bfd block command blocks BFD on a specified interface.

The undo rip bfd block command disables the blocking function.

By default, the blocking function is disabled.

Format

rip bfd block

undo rip bfd block

Parameters

None

Views

Ethernet interface view, Ethernet sub-interface view, Eth-Trunk interface view, Eth-Trunk sub-interface view, Tunnel interface view, Dialer interface view, VLANIF interface view, Virtual-Template interface view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

This command can be used to block the specified interface from enabling BFD on some links where no BFD session is needed.

Precautions

The rip bfd block and rip bfd enable commands are mutually exclusive. If both of them are configured, only the later configured one takes effect.

Example

# Block BFD on GigabitEthernet 0/0/1.

<sysname> system-view

[sysname] interface GigabitEthernet 0/0/1

[sysname-GigabitEthernet0/0/1] rip bfd block