rip output

Function

The rip output command enables an interface to send RIP packets.

The undo rip output command disables an interface from sending RIP packets.

By default, an interface can send RIP packets.

Format

rip output

undo rip output

Parameters

None

Views

Ethernet interface view, Ethernet sub-interface view, Eth-Trunk interface view, Eth-Trunk sub-interface view, Tunnel interface view, Dialer interface view, VLANIF interface view, Virtual-Template interface view

Default Level

2: Configuration level

Usage Guidelines

The priority of silent-interface is higher than the priority of rip input / rip output that is configured in the interface view. By default, an interface does not work in the silent state.

Example

# Enable the interface to send RIP packets.

<sysname> system-view
[sysname] interface GigabitEthernet 0/0/1
[sysname-GigabitEthernet0/0/1] rip output