snmp-agent trap enable feature-name ldp

Function

The snmp-agent trap enable feature-name ldp command enables the trap for the MPLS LDP module.

The undo snmp-agent trap enable feature-name ldp command disables the trap for the MPLS LDP module.

By default, the trap is disabled for the MPLS LDP module.

snmp-agent trap enable feature-name ldp [ trap-name trap-name ]

undo snmp-agent trap enable feature-name ldp [ trap-name trap-name ]

Parameter	Description	Value
trap-name trap-name	Enables or disables a trap of the specified name.	The value can be: session-down-mib: The trap of the event that an LDP session goes Down in the MIB. session-retry: The trap of the event that an LDP session is reestablished. session-up-mib: The trap of the event that an LDP session goes Up in the MIB.

System view

2: Configuration level

All trap messages of the MPLS LDP module are non-excessive trap messages.

If you run this command without specifying the parameter trap-name, all traps of the MPLS LDP module will be enabled or disabled.

# Enable the trap of the event that an LDP session is reestablished.

<sysname> system-view

[sysname] snmp-agent trap enable feature-name ldp trap-name session-retry