undo outbound peer all

Function

The undo outbound peer all command deletes all outbound policies.

Format

undo outbound peer all

Parameters

None

Views

MPLS-LDP view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

Before MPLS LDP is used, the outbound peer fec, outbound peer bgp-label-route, and outbound peer split-horizon commands need to be executed to configure an outbound policy to control LDP label switched path (LSP) establishments. If multiple outbound policies have been configured, run the undo outbound peer all command to simultaneously delete all the outbound policies.

Prerequisites

MPLS LDP has been enabled globally using the mpls ldp command in the system view.

Precautions

Running the undo outbound peer all command deletes all outbound policies. Therefore, exercise caution when running this command.

Example

# Delete all outbound policies.

<sysname> system-view
[sysname] mpls ldp
[sysname-mpls-ldp] undo outbound peer all