Configuring an IPv6 PD Address Pool

Procedure

1. Run system-view

   The system view is displayed.

2. Run dhcpv6 pool pool-name

   An IPv6 PD address pool is created and the address pool view is displayed.

   By default, no IPv6 PD address pool is created on the device.

3. Run prefix-delegation ipv6-prefix/ipv6-prefix-length assign-prefix-length [ life-time { valid-lifetime | infinite } { preferred-lifetime | infinite } ]

   An IPv6 address prefix agent is bound to the IPv6 address pool.

   By default, no IPv6 address prefix agent is bound to the IPv6 address pool.

4. (Optional) Run lock

   The IPv6 PD address pool is locked

   By default, the IPv6 PD address pool is unlocked.

5. (Optional) Run static-bind prefix ipv6-prefix/ipv6-prefix-length duid client-duid [ iaid iaid-value ] [ life-time { valid-lifetime | infinite } { preferred-lifetime | infinite } ]

   An IPv6 address prefix agent is statically bound to the DHCPv6 PD client in the address pool view.

   By default, no IPv6 address prefix agent is bound to the DHCPv6 PD client.

   To statically assign specified IPv6 address prefixes to some specific clients, specify the mapping between IPv6 address prefixes and client DUIDs. When such a client requests an IPv6 address from the DHCPv6 PD server, the device functioning as the DHCPv6 PD server assigns the specified IPv6 address to the client.

   Configure the specified IPv6 address prefixes to be assigned only to the clients with specified DUIDs.