decoding uri-cache

Function

The decoding uri-cache enable command enables the URI cache function.

The decoding uri-cache disable command disables the URI cache function.

Format

decoding uri-cache { enable | disable }

Parameters

Parameter	Description	Value
enable	Enables the function.	-
disable	Disables the function.	-

Views

System view

Default Level

2: Configuration level

Usage Guidelines

By default, the URI cache function is enabled.

If no threat is detected from the corresponding session traffic after the URI cache function is enabled, the system will not inspect the session traffic with the same URI in a period of time. If all traffic must be inspected, disable the URI cache function.

Example

# Disable the URI cache function.

<sysname> system-view
[sysname] decoding uri-cache disable