display hwtacacs-server accounting-stop-packet

Function

The display hwtacacs-server accounting-stop-packet command displays information about Accounting-Stop packets sent by an HWTACACS server.

Format

display hwtacacs-server accounting-stop-packet { all | number | ip { ipv4-address | ipv6-address }} [ slot slot-id cpu cpu-id ]

Parameters

Parameter	Description	Value
all	Displays information about all Accounting-Stop packets.	-
number	Specifies the number of pieces of Accounting-Stop information that can be queried by each process.	The value is an integer that ranges from 1 to 65535.
ip ipv4-address	Displays information about Accounting-Stop packets sent by the HWTACACS server with a specified IPv4 address.	The value is in dotted decimal notation.
ip ipv6-address	Displays information about Accounting-Stop packets sent by the HWTACACS server with a specified IPv6 address.	The value is a 32-digit hexadecimal number, in the format X:X:X:X:X:X:X:X.
slot slot-id	Specifies the slot ID of the service processing unit (SPU).Only the USG6635E/6655E, USG6680E and USG6712E/6716E support this parameter.	-
cpu cpu-id	Specifies the CPU ID.Only the USG6635E/6655E, USG6680E and USG6712E/6716E support this parameter.	-

Views

All views

Default Level

3: Management level

Usage Guidelines

During HWTACACS troubleshooting, you can run this command to check information about Accounting-Stop packets sent by the HWTACACS server.

After an active/standby switchover, statistics about Accounting-Stop packets will be cleared.

Example

# Display information about all Accounting-Stop packets.

All models except USG6635E/6655E, USG6680E and USG6712E/6716E:

<sysname> display hwtacacs-server accounting-stop-packet all
mng-plane:
-------------------------------------------------------------
NO. SendTime      IP Address                         Template
1   10            192.168.1.110                      tac
-------------------------------------------------------------

ctrl-plane:
-------------------------------------------------------------
NO. SendTime      IP Address                         Template
1   10            192.168.1.110                      tac
-------------------------------------------------------------
Whole accounting stop packet to resend:1

USG6680E and USG6712E/6716E:

<sysname> display hwtacacs-server accounting-stop-packet all
slot 0,cpu 0:
---------------------------------------------------
NO. SendTime      IP Address                         Template
1   10            192.168.1.110                      tac
-------------------------------------------------------------
Whole accounting stop packet to resend:1

**Table 1** Description of the **display hwtacacs-server accounting-stop-packet** command output
Item	Description
mng-plane	Management plane.
ctrl-plane	Control plane.
slot	Slot ID of the LPU.
cpu	CPU ID.
NO.	Number of the Accounting-Stop packet.
SendTime	Number of times that Accounting-Stop packets are sent.
IP Address	IP address of the HWTACACS server.
Template	Name of the HWTACACS server template.
Whole accounting stop packet to resend	Total number of Accounting-Stop packets sent by a device.