display ipsec policy (all views)

Function

The display ipsec policy command displays IPSec policy information.

Format

display ipsec policy [ brief | name policy-name [ seq-number ] ]

Parameters

Parameter	Description	Value
brief	Displays brief information about all IPSec policies.	-
name policy-name	Displays detailed information about an IPSec policy with a specified name.	The value must be an existing IPSec policy name.
seq-number	Displays detailed information about an IPSec policy with a specified sequence number.	The value must be an existing IPSec policy sequence number.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

If no parameter is specified, this command displays detailed information about all IPSec policies.

You can use the display ipsec policy brief command to check brief information about all IPSec policies, including:

Name and sequence number
Negotiation mode
ACL number
IKE peer
Local address
Remote address

Using the name parameter, you can view details on the specified IPSec policy. In this case, the information is displayed in detailed format. If you specify name policy-name and do not specify seq-number, the command displays detailed information about an IPSec policy group.

Example

# Display brief information about all the IPSec policies.

<sysname> display ipsec policy brief
Number of policies group : 1 
Number of policies       : 1 
  
Policy name           Mode     ACL         Peer name   Local address    Remote address
--------------------------------------------------------------------------------------
policy1-100           isakmp   3002/IPv4   peer1

**Table 1** Description of the **display ipsec policy brief** command output
Item	Description
Number of policies group	Number of IPSec policy groups. An IPSec policy is identified by its name and sequence number, and multiple IPSec policies with the same name constitute an IPSec policy group.
Number of policies	Number of IPSec policies.
Policy name	Name and sequence number of an IPSec policy. To configure an IPSec policy, run the ipsec policy (system view) command.
Mode	Mode in which an IPSec policy is created: isakmp: The IPSec policy is created in IKE negotiation mode. template: The IPSec policy is created using an IPSec policy template. manual: The IPSec policy is created manually. To configure IPSec policy creation mode, run the ipsec policy (system view) command.
ACL	ACL referenced in the IPSec policy. To reference an ACL in an IPSec policy, run the security acl command.
Peer name	Name of the IKE peer referenced in the IPSec policy. To configure an IKE peer, run the ike-peer command.
Local address	Local IP address used in IPSec negotiation. To configure the local IP address used in IPSec negotiation, run the tunnel local command.
Remote address	Remote IP address used in IPSec negotiation. To configure the remote IP address used in IPSec negotiation, run the tunnel remote command.

# Display information about all IPSec policies.

<sysname> display ipsec policy
=========================================== 
IPSec policy group: "10"         
Using interface: GigabitEthernet0/0/6            
===========================================                    
     Sequence number: 10 
     Policy Alias: map1-10  
     Security data flow: 3000/IPv4
     Peer name    :  rut2 
     Perfect forward secrecy: DH group 14
     Proposal name:  prop1 
     IPSec SA local duration(time based): 3600 seconds 
     IPSec SA local duration(traffic based): 1843200 kilobytes 
     SA trigger mode: Traffic-based
     Route inject state: -
     Route inject nexthop: -                       
     Route inject preference: -  
     Policy state: Enable
     Anti-replay: -  
     Anti-replay window size: 1024         
     Fragment before-encryption: Disable
     Respond-only: Enable
     Policy status  : Inactive
     Smart-link profile: -
     Smart-link using interface: -
     Flow-vrf check : Disable
     Sa keep-holding-to hard-duration : Disable

**Table 2** Description of the **display ipsec policy** command output
Item	Description
IPSec policy group	Name of an IPSec policy group. To configure an IPSec policy group, run the ipsec policy (system view) command.
Using interface	Interface to which an IPSec policy group is applied.
Sequence number	Sequence number of an IPSec policy. To configure a sequence number, run the ipsec policy (system view) command.
Policy Alias	Alias of the IPSec policy. To configure an alias for an IPSec policy, run the alias (ISAKMP IPSec policy view, IPSec policy template view) command.
Security data flow	ACL referenced in the IPSec policy. To reference an ACL in an IPSec policy, run the security acl command.
Peer name	IKE peer referenced in the IPSec policy. To configure an IKE peer, run the ike-peer command.
Perfect forward secrecy	Perfect Forward Secrecy (PFS) used in IKE negotiation: DH group 1: 768-bit Diffie-Hellman group is used during IKE negotiation. DH group 2: 1024-bit Diffie-Hellman group is used during IKE negotiation. DH group 5: 1536-bit Diffie-Hellman group is used during IKE negotiation. DH group 14: 2048-bit Diffie-Hellman group is used during IKE negotiation. DH group 15: 3072-bit Diffie-Hellman group is used during IKE negotiation. DH group 16: 4096-bit Diffie-Hellman group is used during IKE negotiation. DH group 18: 8192-bit Diffie-Hellman group is used during IKE negotiation. DH group 19: 256-bit ECP Diffie-Hellman group is used during IKE negotiation. DH group 20: 384-bit ECP Diffie-Hellman group is used during IKE negotiation. DH group 21: 521-bit ECP Diffie-Hellman group is used during IKE negotiation. DH group 24: 2048-bit Diffie-Hellman group that includes a 256-bit sub-group is used during IKE negotiation. To configure the PFS used in IKE negotiation, run the pfs command.
Proposal name	IPSec proposal referenced in the IPSec policy. To reference an IPSec proposal, run the proposal command.
IPSec SA local duration(time based)	Time-based IPSec SA lifetime. To set the time-based lifetime of the local SA, run the sa duration time-based command in the IPSec policy view.
IPSec SA local duration(traffic based)	Traffic-based IPSec SA lifetime. To set the traffic-based lifetime of the local SA, run the sa duration traffic-based command in the IPSec policy view.
SA trigger mode	SA trigger mode: Automatic Traffic-based To configure an SA trigger mode, run the sa trigger-mode command.
Route inject state	Route injection status: Dynamic: Dynamic route injection is enabled. Static: Static route injection is enabled. To configure route injection, run the route inject command.
Route inject nexthop	Next hop of a generated route: Auto: The device searches its IP routing table for routes of packets based on packets' destination IP addresses, and specifies the next-hop IP address of the optimal route as that of the route to the remote end. ip-address: The next-hop IP address of the route to the remote end is manually specified. To configure route injection, run the route inject command.
Route inject preference	Priority of a generated route. To configure route injection, run the route inject command.
Policy state	Policy status: Enable Disable
Anti-replay	Whether the anti-replay function is enabled. To enable the anti-replay function, run the anti-replay enable command.
Anti-replay window size	IPSec anti-replay window size. This field is available only when the IPSec anti-replay function is enabled. To set the IPSec anti-replay window size, run the anti-replay window command.
Fragment before-encryption	IPSec fragmentation mode: Enable: IPSec packets are fragmented before encryption. Disable: IPSec packets are fragmented after encryption. To configure an IPSec fragmentation mode, run the fragmentation before-encryption command.
Respond-only	Whether the local end is enabled to initiate IPSec negotiation when an IPSec policy in ISAKMP mode is used to create an IPSec tunnel. Enable: The local end functions as the IPSec responder and does not initiate IPSec negotiation. Disable: The local end initiates IPSec negotiation.
Smart-link profile	Smart route selection rule referenced by an IPSec policy. To configure a smart route selection rule, run the smart-link profile command.
Smart-link using interface	Interface selected based on the smart route selection rule.
Flow-vrf check	Whether to enable the check of the VPN instance in a data flow during IPSec encryption/decryption: Enable Disable To enable this function, run the flow-vrf check disable command.
Policy status	IPSec policy status: Active Inactive To set an IPSec policy to the active state, run the policy enable command.
Sa keep-holding-to hard-duration	Whether the device deletes the original IPSec SA after the hard lifetime expires during IPSec SA re-negotiation. Enable: The device will delete the original IPSec SA after the hard lifetime expires. Disable: The device deletes the original IPSec SA immediately. To configure the device to delete the original IPSec SA after the hard lifetime expires, run the sa keep-holding-to hard-duration command.