display ipv6 host

Function

The display ipv6 host command displays the IPv6 static DNS table.

Format

display ipv6 host [ slot slot-id cpu cpu-id ]

Parameters

Parameter	Description	Value
slot-id	Specifies the slot ID. Only the USG6635E/6655E, USG6680E and USG6712E/6716E support this parameter.	-
cpu-id	Specifies the CPU ID. Only the USG6635E/6655E, USG6680E and USG6712E/6716E support this parameter.	-

Parameter

Description

Value

slot-id

Specifies the slot ID.

Only the USG6635E/6655E, USG6680E and USG6712E/6716E support this parameter.

cpu-id

Specifies the CPU ID.

Only the USG6635E/6655E, USG6680E and USG6712E/6716E support this parameter.

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

After running the ipv6 host command to configure IPv6 static DNS entries, you can run this command to check whether mappings between host names and IPv6 addresses are correct.

Example

# Display the IPv6 static DNS table.

<sysname> display ipv6 host
Host                 Age        Flag    IPv6 Address
www.huawei.com        0        static   FC00:1::8
www.sohu.com          0        static   FC00:1::9
Total    :  2

**Table 1** Description of the **display ipv6 host** command output
Item	Description
Host	Host name.
Age	Aging time. The value 0 indicates that the entry is not aged out.
Flag	DNS table identifiers. The value static indicates a static domain name.
IPv6 Address	IPv6 address mapping the domain name.