display protocol-identify

Function

The display protocol-identify command displays the result of application identification.

Format

display protocol-identify { service | all } [ slot slot-id cpu cpu-id ]

Parameters

Parameter	Description	Value
service	Displays the identification result of the specified application.	The value must be the name of an existing application.
all	Displays the identification results of all applications.	-
slot slot-id	Specifies the slot ID of the SPU. Only the USG6635E/6655E, USG6680E and USG6712E/6716E support this parameter.	-
cpu cpu-id	Specifies the CPU ID. Only the USG6635E/6655E, USG6680E and USG6712E/6716E support this parameter.	-

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

The system generates an entry after identifying an application. Then the system can forward subsequent packets of the applications matching the entries according to corresponding policies, which improves the application identification efficiency.

Example

# Display the identification result of all applications.

<sysname> display protocol-identify all
Total: 1
-------------------------------------------------------------------------------
ID    SERVER          PORT      SERVICE     VPN-Instance     TTL    Left-Time  
1     10.2.2.2         5555      HTTP        aaa              3600   00:02:30
---------------------------------------------------------------------------------

**Table 1** Description of the **display protocol-identify** command output
Item	Description
ID	Application ID
SERVER	IP address of the server
PORT	Port of the server
SERVICE	Protocol
VPN-Instance	VPN instance information
TTL	The total aging time of the entry.
Left-Time	The remained aging time of the entry.