hwtacacs-server source-ipv6

Function

The hwtacacs-server source-ipv6 command specifies the source IPv6 address used by a device to communicate with an HWTACACS server.

The undo hwtacacs-server source-ipv6 command cancels the configuration.

By default, the device uses the IPv6 address of the actual outbound interface as the source IPv6 address encapsulated in HWTACACS packets.

hwtacacs-server source-ipv6 ipv6-address

hwtacacs-server source-ipv6 source-loopback interface-number

undo hwtacacs-server source-ipv6

Parameter	Description	Value
ipv6-address	Specifies the source IPv6 address for communicating with the HWTACACS server.	The value is a 32-digit hexadecimal number, in the format X:X:X:X:X:X:X:X.
source-loopback interface-number	Specifies the IPv6 address of the loopback interface as the source IPv6 address for communicating with the HWTACACS server.	The loopback interface must already exist.

HWTACACS server template view

3: Management level

After you specify the source IPv6 address in HWTACACS packets, the device uses this IPv6 address to communicate with the HWTACACS server.

If you run this command multiple times, only the latest configuration takes effect.

# Specify the source IPv6 address fc00::1 in HWTACACS packets.

<sysname> system-view
[sysname] hwtacacs-server template test1
[sysname-hwtacacs-test1] hwtacacs-server source-ipv6 fc00::1