nbns-list

Function

The nbns-list command configures the NetBIOS server address for the DHCP client.

The undo nbns-list command deletes a configured NetBIOS server address.

By default, no NetBIOS server address is configured.

Format

nbns-list ip-address &<1-8>

undo nbns-list { ip-address | all }

Parameters

Parameter	Description	Value
ip-address	Specifies the IP address of a NetBIOS server.	The value is in dotted decimal notation. A maximum of eight NetBIOS server addresses can be configured. These IP addresses are separated by spaces.
all	Deletes all NetBIOS server addresses.	-

Views

IP address pool view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

This command applies to DHCP servers. Before hosts communicate with each other, a NetBIOS server needs to resolve the accessedNetBIOS hostname to an IP address. To enable hosts to communicate with each other, run the nbns-list command to configure NetBIOS server addresses. When assigning IP addresses to clients, a DHCP server also assigns the configured NetBIOS server addresses to clients. To configure NetBIOS server addresses for an interface address pool, run the dhcp server nbns-list command.

Precautions

In the IP address pool view, a device can be configured with a maximum of eight NetBIOS server addresses. The first assigned address functions as the primary address, and the other seven addresses function as secondary addresses.

Example

# In the IP address pool view, set the IP address of the NetBIOS server to 192.168.1.1.

<sysname> system-view
[sysname] ip pool global1
[sysname-ip-pool-global1] nbns-list 192.168.1.1