radius-attribute nas-ip

Function

The radius-attribute nas-ip command sets the NAS-IP-Address attribute in a RADIUS packet sent from an NAS.

The undo radius-attribute nas-ip command deletes the configured NAS-IP-Address attribute.

By default, the source IP address of the NAS is the NAS-IP-Address attribute value.

Format

radius-attribute nas-ip ip-address

undo radius-attribute nas-ip

Parameters

Parameter	Description	Value
ip-address	Specifies the NAS-IP-Address attribute value in RADIUS packets sent by the device.	The value is a valid unicast address in dotted decimal notation.

Views

RADIUS server template view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

A RADIUS server uses the NAS-IP-Address attributes in RADIUS packets sent by NASs to identify NASs. You can run the radius-attribute nas-ip command in the RADIUS server template view to set the NAS-IP-Address attribute.

Prerequisites

A RADIUS server template has been created using the radius-server template command.

Precautions

If the RADIUS NAS-IP-Address attribute is set to an invalid IP address, the configuration fails and an error message is displayed.

Example

# Set the RADIUS NAS-IP-Address attribute.

<sysname> system-view
[sysname] radius-server template temp1
[sysname-radius-temp1] radius-attribute nas-ip 10.3.3.3