radius-server accounting-stop-packet resend

Function

The radius-server accounting-stop-packet resend command enables retransmission of accounting-stop packets and sets the number of accounting-stop packets that can be retransmitted each time.

The undo radius-server accounting-stop-packet resend command disables retransmission of accounting-stop packets.

By default, retransmission of accounting-stop packets is enabled, and the retransmission times is 3.

The default settings are recommended. If accounting-stop packets need to be retransmitted many times, the RADIUS authentication performance of the switch will be affected and even cause a failure to send accounting-stop packets.

Format

radius-server accounting-stop-packet resend [ resend-times ]

undo radius-server accounting-stop-packet resend

Parameters

Parameter	Description	Value
resend-times	Specifies the number of accounting-stop packets that can be retransmitted each time.	The value is an integer that ranges from 0 to 1024.

Views

RADIUS server template view

Default Level

3: Management level

Usage Guidelines

When accounting-stop packets cannot be sent to the RADIUS server that is unreachable, you can run the radius-server accounting-stop-packet resend command to save the accounting-stop packets in the buffer and send them at the preset intervals until the number of allowed retransmission times is reached or the packets are sent successfully.

Example

# Enable the retransmission of accounting-stop packets and set the number of accounting-stop packets that can be retransmitted each time to 50.

<sysname> system-view
[sysname] radius-server template test1
[sysname-radius-test1] radius-server accounting-stop-packet resend 50