reset engine session table

Function

The reset engine session table command clears the session information of the engine.

Format

reset engine session table [ vsys vsys-name | all-systems ] [ source source-ip-address | destination destination-ip-address | destination-port destination-port-number | protocol { tcp | udp } ] ^* [ slot slot-id cpu cpu-id ]

reset engine ipv6 session table [ vsys vsys-name | all-systems ] [ source source-ipv6-address | destination destination-ipv6-address | destination-port destination-port-number | protocol { tcp | udp } ] ^* [ slot slot-id cpu cpu-id ]

Parameters

Parameter	Description	Value
ipv6	Indicate the IPv6 status and configuration information.	-
vsys vsys-name	Specifies the virtual system name.	The virtual system must exist.
all-systems	Including all systems, including the root system and virtual system.	-
source source-ip-address	Specifies the source IPv4 address.	The value is in dotted decimal notation.
destination destination-ip-address	Specifies the destination IPv4 address.	The value is in dotted decimal notation.
source source-ipv6-address	Specifies the source IPv6 address.	The value is in hexadecimal notation.
destination destination-ipv6-address	Specifies the destination IPv6 address.	The value is in hexadecimal notation.
destination-port destination-port-number	Specifies the destination port number.	The value is an integer ranging from 0 to 65535.
protocol	Indicates a protocol.	-
tcp	Indicates Transmission Control Protocol (TCP).	-
udp	Indicates User Datagram Protocol (UDP).	-
slot slot-id	Specifies the slot ID of the SPU. Only the USG6635E/6655E, USG6680E and USG6712E/6716E support this parameter.	-
cpu cpu-id	Specifies the CPU ID. Only the USG6635E/6655E, USG6680E and USG6712E/6716E support this parameter.	-

Views

User view

Default Level

3: Management level

Usage Guidelines

The session information of the specified virtual system or all systems can be cleared only in the root system. In a virtual system, you can clear only the session information of the virtual system.

If no parameter is specified, all session information of the engine is cleared after you run the reset engine session table command.

Use caution before you decide to run this command. Clearing the session information of the engine adversely affects the service operating.

Example

# Clear all session information of the engine.

<sysname> reset engine session table
Warning: Reseting session table will affect the engine's normal service. Continue? [Y/N]: Y
<sysname>