scenario

Function

The scenario command configures the remote end access type in an IPSec policy template.

The undo scenario command cancels the configuration.

Format

scenario { point-to-point | point-to-multi-point [ branch-access | ikev1-user-access | ikev2-user-access | l2tp-user-access ] ^* }

undo scenario

Parameters

Parameter	Description	Value
point-to-point	Indicates that the remote end access type in an IPSec policy template is point-to-point.	-
point-to-multi-point	Indicates that the remote end access type in an IPSec policy template is point-to-multipoint.	-
branch-access	Indicates that the remote end access type in an IPSec policy template is permitting branch access.	-
ikev1-user-access	Indicates that the remote end access type in an IPSec policy template is permitting IKEv1 user access.	-
ikev2-user-access	Indicates that the remote end access type in an IPSec policy template is permitting IKEv2 user access.	-
l2tp-user-access	Indicates that the remote end access type in an IPSec policy template is permitting L2TP user access.	-

Views

IPSec policy template view

Default Level

2: Configuration level

Usage Guidelines

This command is invoked on the web. After you run this command, supported branch access types are listed on the web page.

Example

# Configure the remote end access type in IPSec policy template policy1 to point-to-point.

<sysname> system-view
[sysname] ipsec policy-template policy1 1
[sysname-ipsec-policy-templet-policy1-1] scenario point-to-point