Enabling the Information Center
The FW can output alarms only after the information center is enabled.
Context
By default, the information center is enabled on the FW. If the information center is disabled, perform the following operations to enable the information center.
When the information center is enabled and the system is busy sorting and outputting information, system performance is affected.
Procedure
- Access the system view.
system-view
- Enable the information center.
info-center enable
- Optional: Name the information channel.
info-center channel channel-number name channel-name
Each information channel must have a unique name, and the channel names must represent the actual channel functions.
- Optional: Configure a timestamp is configured for alarms.
info-center timestamp trap { boot | { date | short-date | format-date } [ precision-time { second | tenth-second | millisecond } ] } [ without-timezone ]
The default alarm timestamp format is date.