Configuring the FW to Output Alarms

You can configure the FW to output alarms through the information center. By viewing the alarms, you can rapidly rectify the faults to ensure the normal operation of the FW.

Enabling the Information Center: The FW can output alarms only after the information center is enabled.

Outputting Alarms to the Trap Buffer: If you want to view alarms generated on the FW in the trap buffer, you can configure the FW to output alarms to the trap buffer.

Outputting Alarms to Log Files: If you want to save alarms as files on the FW, you can configure the FW to output alarms to log files.

Outputting Alarms to the Console: If you want to query alarms generated on the FW on the console, you can configure the FW to output alarms to the console.

Outputting Alarms to a Terminal: If you want to query alarms generated on the FW on a terminal, you can configure the FW to output alarms to the terminal.

Outputting Alarms to a Log Host: If you want to view alarms generated on the FW on the log host, you can configure the FW to output alarms to the log host.

Outputting Alarms to the SNMP Agent: If you want to query alarms generated on the FW on the NMS, you can configure the FW to output alarms to the SNMP agent.

Parent Topic: Alarms

Copyright © Huawei Technologies Co., Ltd.

Copyright © Huawei Technologies Co., Ltd.

< Previous topic Next topic >