Outputting Alarms to the SNMP Agent

If you want to query alarms generated on the FW on the NMS, you can configure the FW to output alarms to the SNMP agent.

To output alarms to the NMS, you need to output alarms to the SNMP agent. The SNMP agent then sends the alarms to the NMS server.

Add alarm information to the information channel.

info-center source { module-name | default } channel { channel-number | channel-name } trap { state { off | on } | level severity } *

Optional: Specify the information channel through which alarms are output to the SNMP agent.
```
info-center snmp channel { channel-number | channel-name }
```
By default, channel 5 is used.
Enable the SNMP agent function.
```
snmp-agent
```
By default, this function is disabled.

After the SNMP agent function is enabled, you must configure the SNMP function. Otherwise, alarms cannot be sent to the NMS. For the SNMP configuration, see SNMP.