Configuring Cloud Management-Simple Wizard

Context

In simple wizard mode, the FW obtains the domain name and port number of the cloud management platform from the device registration center, and then connects to the cloud management platform.
The simple wizard allows a device to access the Internet in PPPoE, DHCP, or 4G mode.
If There are problems with the security certificate for this site is displayed on the browser when you log in to https://192.168.0.1:8443/hw, click Continue.

Data Planning

Before configuring the device, prepare the data listed in the following table according to the actual Internet access mode. The data in the following table is for reference only.

Internet Access Mode	Item	Description
PPPoE	User name: user Password: Admin@123	Select service interface GE0/0/1 for connecting to the Internet. Obtain the data in the Item column from your network service provider or network administrator.
DHCP	-
Fixed IP address	-

Internet Access Mode

Item

Description

PPPoE

User name: user

Password: Admin@123

Select service interface GE0/0/1 for connecting to the Internet.

Obtain the data in the Item column from your network service provider or network administrator.

DHCP

Fixed IP address

Procedure

Connect the device.
1. Connect the ground terminal of the firewall to the ground bar in the equipment room using a ground cable.
2. Connect the service interface (only GE0/0/1) to the Internet using a network cable.
3. Connect a power cable.
4. Connect the management interface (GE0/0/0) to the PC using a network cable.
  The default username and password are available in HUAWEI Security Products Default Usernames and Passwords. If you have not obtained the access permission of the document, see Help on the website to find out how to obtain it.
Change the password after login.
1. On a management PC, set the IP address of the network interface to any address in the 192.168.0.2-192.168.0.254 range (192.168.0.2 in this example) and the subnet mask to 255.255.255.0.
2. Open a browser, access https://192.168.0.1:8443/hw, and log in to the FW.
  The FW does not have an administrator account by default. When logging in to the device for the first time, register an administrator account and password according to the prompt information on the login page, and then log in.
Set Internet access parameters and connect to the cloud platform.
1. Select an Internet access mode based on actual requirements. In this example, the PPPoE session is always online.
  - If you have an Internet access account, select Yes, enter the account, and access the Internet in PPPoE mode. Set the user name to user and the password to Admin@123.
  - If you do not have an Internet account, select No and access the Internet through DHCP .
2. Click Apply. The device restarts and automatically connects to the cloud platform.
  
  If you need to modify the preceding configurations, restore the factory settings first.