border-relay address

Function

The border-relay address command specifies the IPv4 address of the 6RD Border Relay.

The undo ipv6-prefix command deletes the IPv4 address of the 6RD Border Relay.

Format

border-relay address br-ipv4-address

undo border-relay address

Parameters

Parameter	Description	Value
br-ipv4-address	Specifies the IPv4 address of the 6RD Border Relay.	-

Views

Tunnel interface view

Default Level

2: Configuration level

Usage Guidelines

In the 6RD domain-IPv6 network scenario, the IPv4 address of the 6RD BR needs to be specified on the 6RD CE device. This IPv4 address is the source address of the 6RD BR.

This command is available only when the tunnel encapsulation mode is set to 6RD. Configure the tunnel-protocol 6rd command first.

Example

# Set the IPv4 address of the 6RD BR on the 6RD CE device in a 6RD relay scenario. Assume that the source address of the 6RD BR is 10.1.1.2/24.

<sysname> system-view
[sysname] interface tunnel 1
[sysname-Tunnel1] tunnel-protocol ipv6-ipv4 6rd
[sysname-Tunnel1] border-relay address 10.1.1.2