cluster track trunk-member enable

Function

The cluster track trunk-member enable command configures the cluster to track Eth-Trunk member interfaces.

The undo cluster track trunk-member enable command disables the cluster from tracking Eth-Trunk member interfaces.

Format

cluster track trunk-member enable

undo cluster track trunk-member enable

Parameters

None

Views

System view

Default Level

2: Configuration level

Usage Guidelines

By default, the cluster does not track Eth-Trunk member interfaces.

Before running the cluster track trunk-member enable command, run the cluster track interface eth-trunk command first.

Configuration Impact

After the cluster is configured to track an Eth-Trunk member interface, if a member interface is down, the device health rating decreases, triggering the master/backup switchover in the service group.

Example

# Configure the cluster to track Eth-Trunk member interfaces.

C_No1_M<sysname> system-view
C_No1_M[sysname] cluster track interface Eth-Trunk 1
C_No1_M[sysname] cluster track trunk-member enable