display alarm active

Function

The display alarm active command displays the contents of active alarms in the system.

Format

display alarm active

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

To obtain information about all active alarms in the system, you can run the display alarm active command.This command is used to notify the external NMS of the general alarm mechanism. If you run this command to query alarm information, the NMS will display the alarm information.

Example

# Display the contents of all active alarms in the system.

<sysname> display alarm active

A/B/C/D/E/F/G/H/I/J
A=Sequence, B=RootKindFlag(Independent|RootCause|nonRootCause)
C=Generating time, D=Clearing time
E=ID, F=Name, G=Level, H=State
I=Description information for locating(Para info, Reason info)
J=RootCause alarm sequence(Only for nonRootCause alarm)

  1/Independent/2016-12-28 12:06:38+08:00/-/0xffae201c/hwPowerRemove/Warning/Sta
rt/OID 1.3.6.1.4.1.2011.5.25.219.2.5.1 Power is absent.(Index=68681737, EntityPh
ysicalIndex=68681737, PhysicalName="PWR", EntityTrapFaultID=136448)

**Table 1** Description of the display alarm active command output
Item	Description
Sequence	Sequence number
RootKindFlag	Flag indicating a root-cause alarm or a non-root-cause alarm: Independent: indicates an alarm for which alarm correlation analysis is not performed. RootCause: indicates a root-cause alarm. nonRootCause: indicates a non-root-cause alarm.
Generating time	Time when the alarm is generated
Clearing time	Time when the alarm is cleared
ID	Alarm ID
Name	Alarm name
Level	Alarm severity level
State	Alarm status: Start End
Description information for locating	Alarm description
RootCause alarm sequence(Only for nonRootCause alarm)	Sequence number of the root-cause alarm (for non-root-cause alarms only)