display bypass

Function

The display bypass command displays the state of the bypass link.

Format

display bypass

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

None

Example

# Display the state of the bypass link.

<sysname> display bypass
 Info: The hardware-based bypass function is available only when the combo inter
face works in electrical mode. When the combo interface works in optical mode, t
he bypass link is not displayed in the bypass list.
 -------------------------------------------------------------------------------
 Bypass Link        Bypass Interface Pair   Bypass State    State Switchback Mode
 -------------------------------------------------------------------------------
 bypasslink 0/0/0   GE0/0/20<->GE0/0/21     Bypass          Manual
 bypasslink 0/0/1   GE0/0/22<->GE0/0/23     Non-bypass      Auto  
 -------------------------------------------------------------------------------

**Table 1** Description of the **display bypass** command output
Item	Description
Bypass Link	Indicates the bypass link ID.
Bypass Interface Pair	Indicates a pair of bypass interfaces.
Bypass State	Indicates the status of the interface. Bypass: indicates that the interface is in bypass state. Non-bypass: indicates that the interface is in non-bypass state.
State Switchback Mode	Indicates the state switchback mode. If the device is powered off or restarted unexpectedly, the interface automatically enters the bypass state. When the device recovers, the interface decides whether to switch back to the non-bypass state according to the setting of the state switchback mode: Auto: If the switch bypass command has been configured before recovery, the interface stays in bypass state. Otherwise, the interface automatically switches to the non-bypass state. Manual: The interface stays in bypass state.