display ipv6 interface tunnel

Function

The display ipv6 interface tunnel command displays IPv6 attributes of the tunnel interface.

display ipv6 interface tunnel interface-number

Parameter	Description	Value
interface-number	Specifies the number of the tunnel interface.	-

All views

1: Monitoring level

None

# Display IPv6 attributes of the tunnel interface.

<sysname> display ipv6 interface tunnel 1

Tunnel1 current state : UP

IPv6 protocol current state : UP

IPv6 is enabled, link-local address is FE80::201:102

  Global unicast address(es):

    ::2.1.1.2, subnet is ::/96

  Joined group address(es):

    FF02::1:FF01:102

    FF02::2

    FF02::1

  MTU is 1500 bytes

  ND reachable time is 30000 milliseconds

  ND retransmit interval is 1000 milliseconds

**Table 1** Description of the **display ipv6 interface tunnel** command output
Item	Description
Tunnel1 current state:	Indicates current status of the tunnel interface: Up: enabled. Down: disabled. For the IPv6 over IPv4 tunnel, the status is Up when it works normally.
IPv6 protocol current state	Indicates the current status of the link protocol: Up: enabled. Down: disabled. For the IPv6 over IPv4 tunnel, the status is Up when it works normally.
IPv6 is enabled	Indicates IPv6 is enabled
link-local address	Indicates link local address.
Global unicast address (es)	Indicates global unicast address.
Joined group address (es)	Indicates joined multicast address.
MTU	Indicates MTU of the interface.
ND reachable time	Indicates the period of detecting ND reachability.
ND retransmit interval	Indicates the interval of retransmitting ND.