display priority-of-link-quality table

Function

The display priority-of-link-quality table command displays the configuration information and result of link quality detection.

Format

display priority-of-link-quality table { all | pbr [ rulename rulename ] | global } [ destination destination-address [ mask mask-length ] | status { detecting | detect-failed | detect-success } ] ^* [ slot slot-id cpu cpu-id ]

Parameters

Parameter	Description	Value
all	Displays quality detection information about the links of intelligent uplink selection, including PBR and global intelligent uplink selection.	-
rulename	Specifies the name of the PBR rule.	-
global	Displays link quality detection information about global intelligent uplink selection.	-
destination-address	Specifies the destination address.	The value is in decimal dotted notation.
mask-length	Specifies the mask length.	The value is an integer ranging from 1 to 32.
detecting	Indicates that link quality is being detected.	-
detect-failed	Indicates a link quality detection failure.	-
detect-success	Indicates a link quality detection success.	-
slot-id	Specifies the slot ID. Only the USG6635E/6655E, USG6680E and USG6712E/6716E support this parameter.	-
cpu-id	Specifies the CPU ID. Only the USG6635E/6655E, USG6680E and USG6712E/6716E support this parameter.	-

Views

All views

Default Level

2: Configuration level

Usage Guidelines

You can run the priority-of-link-quality table aging-time aging-time command to set the aging time of link quality detection entries.

Example

# Display link quality detection information.

<sysname> display priority-of-link-quality table all
Smart Route intelligent control table item(s) on slot 11 cpu 0                   
--------------------------------------------------------------------------------
--------------------------------------------                                    
PolicyType RuleName/ID Status           Destination IP  Interface               
    Loss Latency Jitter Point                                                   
--------------------------------------------------------------------------------
--------------------------------------------

**Table 1** Description of parameters in the link quality detection table
Parameter	Description
PolicyType	Type of a policy, which can be global routing or PBR
RuleName/ID	Name or ID of a policy
Status	Detection status, which can be: Detecting: The detection is in process. Detected-Succeed: The detection succeeds. Detected-Failed: The detection fails. Aging: The detection entry is aging. Init: The detection has not started.
Destination IP	Destination IP address
Interface	Outgoing interface
Loss	Packet loss ratio
Latency	Latency
Jitter	Jitter
Point	Value calculated based on the packet loss ratio, latency, and jitter