display this ipv6 interface

Function

The display this ipv6 interface command displays IPv6 information on the current interface.

Format

display this ipv6 interface

Parameters

None

Views

Ethernet interface, Eth-Trunk interface view, Tunnel interface view, Loopback interface view, Dialer interface view, VLANIF interface view, BDIF interface view

Default Level

1: Monitoring level

Usage Guidelines

None

Example

# Display IPv6 information about GigabitEthernet 0/0/1.

<sysname> system-view
[sysname] interface GigabitEthernet 0/0/1
[sysname-GigabitEthernet0/0/1] display this ipv6 interface
GigabitEthernet0/0/1 current state : UP
IPv6 protocol current state : UP
IPv6 is enabled, link-local address is FE80::2E0:4AFF:FE3D:9801
  Global unicast address (es):
    2001::1, subnet is 2001::/64
  Joined group address (es):
    FF02::1:FF00:1
    FF02::1:FF3D:9801
    FF02::2
    FF02::1
  MTU is 1500 bytes
  ND DAD is enabled, number of DAD attempts: 1
  ND reachable time is 30000 milliseconds
  ND retransmit interval is 1000 milliseconds
  ND stale time is 1200 seconds

**Table 1** Description of the **display this ipv6 interface** command output
Item	Description
GigabitEthernet0/0/1 current state	Status of GigabitEthernet 0/0/1
Line protocol current state	Protocol status of the interface
link-local address	Link local address configured on the interface
Global unicast address(es)	Global unicast addresses configured on the interface
Joined group address(es)	Multicast addresses that have joined the interface
MTU	Maximum transmission unit of the interface
number of DAD attempts	Number of conflict address detection times
ND reachable time	Time period for a neighbor to keep reachable
ND retransmit interval	Retransmission interval
ND stale time is 1200 seconds	Time period for the neighbor to keep the STALE state