firewall dynamic-resource used-up alarm server-map threshold

Function

The firewall dynamic-resource used-up alarm server-map threshold command sets an alarm threshold for the usage of server-map entries.

The undo firewall dynamic-resource used-up alarm server-map threshold command restores the default value.

Format

firewall dynamic-resource used-up alarm server-map threshold threshold

undo firewall dynamic-resource used-up alarm server-map threshold

Parameters

Parameter	Description	Value
threshold	Specifies the alarm threshold for the usage of server-map entries.	The value is an integer ranging from 1% to 100%. The default value is 80%.

Views

System view

Default Level

3: Management level

Usage Guidelines

The default alarm threshold is 80%. Before setting an alarm threshold for the usage of server-map entries, run the firewall dynamic-resource used-up alarm server-map enable or firewall dynamic-resource used-up alarm all enable command to enable the function of sending logs and alarms when the usage of server-map entries reaches the threshold. Otherwise, no log or alarm is sent when the usage of server-map entries reaches the threshold.

When the usage of server-map entries reaches the alarm threshold, log FWD/4/RES_OVER and alarm FWD_1.3.6.1.4.1.2011.6.122.15.3.4.1 hwSecStatSvrMapTrapOverThreshold are sent. When the usage of server-map entries falls below 95% of the alarm threshold, log FWD/4/RES_BELOW and alarm FWD_1.3.6.1.4.1.2011.6.122.15.3.4.2 hwSecStatSvrMapTrapBelowThreshold are sent.

Example

# Set the alarm threshold for the usage of server-map entries to 85%.

<sysname> system-view
[sysname] firewall dynamic-resource used-up alarm server-map enable
[sysname] firewall dynamic-resource used-up alarm server-map threshold 85