firewall dynamic-resource used-up alarm sslvpn-ip-address enable

Function

The firewall dynamic-resource used-up alarm sslvpn-ip-address enable command enables the function of sending an alarm after the IP address usage of a virtual gateway address pool reaches the threshold.

The undo firewall dynamic-resource used-up alarm sslvpn-ip-address enable command disables the function of sending an alarm after the IP address usage of a virtual gateway address pool reaches the threshold.

Format

firewall dynamic-resource used-up alarm sslvpn-ip-address enable

undo firewall dynamic-resource used-up alarm sslvpn-ip-address enable

Parameters

None

Views

System view

Default Level

3: Management level

Usage Guidelines

The IP address usage of a virtual gateway address pool refers to the ratio of allocated IP addresses to total IP addresses in a virtual gateway network extension address pool.

By default, this alarm function is enabled. The device sends an alarm once the IP address usage of a virtual gateway address pool reaches the threshold.

You can use the firewall dynamic-resource used-up alarm sslvpn-ip-address threshold command to set the alarm threshold.

Example

# Enable the function of sending an alarm after the IP address usage of a virtual gateway address pool reaches the threshold.

<sysname> system-view
[sysname] firewall dynamic-resource used-up alarm sslvpn-ip-address enable