firewall trace source vrp-message-car enable

Function

The firewall trace source vrp-message-car enable command enables automatic sampling and the function for recording received packet information.

The undo firewall trace source vrp-message-car enable command disables automatic sampling and the function for recording received packet information.

Format

firewall trace source vrp-message-car enable

undo firewall trace source vrp-message-car enable

Parameters

None

Views

System view

Default Level

2: Configuration level

Usage Guidelines

By default, automatic sampling and the function for recording received packet information are enabled.

When the received traffic reaches the threshold, the FW that has the function enabled will perform automatic sampling and record packet information to the user log file log.log.

To view the threshold for each application-layer service sent to the local device, run the display firewall dataplane to manageplane car type { type | all } command.

Example

# Enable automatic sampling and the function of recording received packet information.

<sysname> system-view
[sysname] firewall trace source vrp-message-car enable