hrp mgt-interface

Function

The hrp mgt-interface command sets the management interface of hot standby.

The undo hrp mgt-interface command deletes the management interface of hot standby.

Format

hrp mgt-interface interface-type interface-number

undo hrp mgt-interface interface-type interface-number

Parameters

Parameter	Description	Value
interface-type interface-number	Specifies the interface type and interface number.	The interface type is GigabitEthernet, Eth-Trunk, or VLANIF.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

The commands in the management interface view of hot standby cannot be synchronized. The management interface of hot standby is used to connect the management or log device in mirroring mode.

Example

# Set GigabitEthernet 0/0/10 as the management interface of hot standby.

<sysname> system-view
[sysname] hrp mgt-interface GigabitEthernet 0/0/10