move link

Function

The move link command moves links involved in IPSec intelligent link selection to change their priorities.

The virtual system does not support this command.

move link link-id1 to link-id2

Parameter	Description	Value
link-id1	Specifies the ID of the link to be moved.	The value must be an existing link ID.
to	Moves link-id1 to the front of link-id2.	-
link-id2	Specifies a target link ID.	The value must be an existing link ID.

IPSec intelligent link selection view

2: Configuration level

After moving a link, you can run the display ipsec smart-link profile command to check whether the link sequence is the desired one.

# Move link 5 in IPSec intelligent link selection profile profile1 to the front of link 1 so that link 5 takes precedence over link 1.

<sysname> system-view
[sysname] ipsec smart-link profile profile1
[sysname-ipsec-smart-link-profile-profile1] move link 5 to 1