< Home

smart-link enable

Function

The smart-link enable command enables an IPSec intelligent link selection profile.

The undo smart-link enable command disables an IPSec intelligent link selection profile.

The virtual system does not support this command.

Format

smart-link enable

undo smart-link enable

Parameters

None

Views

IPSec intelligent link selection view

Default Level

2: Configuration level

Usage Guidelines

By default, an IPSec intelligent link selection profile is enabled.

After an IPSec intelligent link selection profile is disabled, the IPSec tunnel created based on the profile can still take effect.

Example

# Disable IPSec intelligent link selection selection profile profile1.

<sysname> system-view
[sysname] ipsec smart-link profile profile1
[sysname-ipsec-smart-link-profile-profile1] undo smart-link enable
Parent Topic: IPSec Configuration Commands
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >