loadgroup

Function

The loadgroup command creates a load balancing group and enter its view.

The undo loadgroup command deletes an existing load balancing group.

By default, no load balancing group is configured.

The virtual system does not support this command.

Format

loadgroup group-name

undo loadgroup group-name

Parameters

Parameter	Description	Value
group-name	Specifies the name of a load balancing group.	The value is a string of 1 to 31 case-insensitive characters and cannot contain spaces or question marks (?).

Views

System view

Default Level

2: Configuration level

Usage Guidelines

Load balancing groups are required if IKEv2 redirection is enabled.

A load balancing group defines the following information, such as the IP address for base station access, load information reported by member gateways, number of the UDP port through which load notification packets are transmitted, authentication key string, hold time of member gateway information in the group, and algorithm for determining redirection members.

Example

# Configure a load balancing group named group1.

<sysname> system-view
[sysname] loadgroup group1
[sysname-loadgroup-group1]