port (load balancing group view)

Function

The port command specifies the UDP port number for sending and receiving load information in the load balancing group.

The undo port command sets the UDP port number for sending and receiving load information in the load balancing group to the default value.

By default, the load balancing group uses UDP port 2014.

The virtual system does not support this command.

Format

port port-number

undo port

Parameters

Parameter	Description	Value
port-number	Specifies the port number.	The value is an integer ranging from 2048 to 65535. The port number must not be well-known or used by other modules already.

Views

Load balancing group view

Default Level

2: Configuration level

Usage Guidelines

Other members use the specified UDP port to send their load information to the master device, and the master device uses the specified UDP port to receive load information from other devices.

Example

# Configure that the load balancing group uses UDP port 2048.

<sysname> system-view
[sysname] loadgroup group1
[sysname-loadgroup-group1] port 2048