tracert-hopfailtimes

Function

The tracert-hopfailtimes command sets the maximum number of failed hops in Trace tests.

The undo tracert-hopfailtimes command restores the default setting.

Format

tracert-hopfailtimes times

undo tracert-hopfailtimes

Parameters

Parameter	Description	Value
times	Specifies the number of continuously failed hops.	The value is an integer that ranges from 1 to 255. The default value is 5.

Views

NQA view

Default Level

2: Configuration level

Usage Guidelines

Prerequisites

Before using the tracert-hopfailtimes command, run the test-type command to specify the type of the test instance as trace.

Precautions

You cannot change this configuration when the test is performed.

Example

# Set the number of continuously failed hops to 10.

<sysname> system-view
[sysname] nqa test-instance admin trace
[sysname-nqa-admin-trace] test-type trace
[sysname-nqa-admin-trace] tracert-hopfailtimes 10