The clear mgr inactive-configuration command deletes the Operation Administration and Maintenance (OAM) manager (MGR) module if an interface board or subcard is not in position.
| Parameter | Description | Value |
|---|---|---|
slot slot-id |
Deletes the MGR module on a specified interface board. |
- |
card card-id |
Deletes the MGR module on a specified subcard. |
- |
Usage Scenario
In the OAM MGR view where an association is configured between different modules, if an interface board or a subcard on which the association is configured is removed or powered off, you can run the clear mgr inactive-configuration command to clear the corresponding association configurations. This way protects association on other interface boards or subcards.
In a scenario where connectivity fault management (CFM) is associated with the Virtual Router Redundancy Protocol (VRRP), if the interface board on which VRRP is configured is removed from its slot, run the clear mgr inactive-configuration command to delete the configurations of the association between CFM and VRRP. After that, you can associate CFM with other functions.
Configuration Impact
If configurations of an association are cleared using this command, the status of an associated module may not be restored. For the association between CFM and VRRP, if the interface board on which the VRRP is configured is removed, CFM status may not be recovered.
Precautions
After the clear mgr inactive-configuration command is run, configurations of an association between the CFM and VRRP are deleted and cannot be restored. Exercise caution when using this command.