display default-parameter pim-dm

Function

The display default-parameter pim-dm command displays default configurations about Protocol Independent Multicast-Dense Mode (PIM-DM).

Format

display default-parameter pim-dm

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

Using this command displays only default configurations, regardless of whether the configurations about PIM-DM parameters are changed.

Example

# Display default configurations about PIM-DM.

<sysname> display default-parameter pim-dm
  PIM View Default Configurations:
  ---------------------------------
  Hello-option dr-priority: 1
  Hello-option holdtime: 105 s
  Hello-option lan-delay: 500 ms
  Hello-option neighbor-tracking: disabled
  Hello-option override-interval: 2500 ms
  Holdtime assert: 180 s
  Holdtime join-prune: 210 s
  Source-lifetime: 210 s
  State-refresh-interval: 60 s
  State-refresh-rate-limit: 30 s
  State-refresh-ttl: 255
  Hello periodic interval: 30 s
  Join-prune periodic interval: 60 s

  Interface View Default Configurations:
  --------------------------------------
  Pim bfd: disabled
  Pim hello-option dr-priority: 1
  Pim hello-option holdtime: 105 s
  Pim hello-option lan-delay: 500 ms
  Pim hello-option neighbor-tracking: disabled
  Pim hello-option override-interval: 2500 ms
  Pim holdtime assert: 180 s
  Pim holdtime join-prune: 210 s
  Pim require-genid: disabled
  Pim silent: disabled
  Pim state-refresh-capable: enabled
  Pim timer dr-switch-delay: disabled
  Pim timer graft-retry: 3 s
  Pim hello periodic interval: 30 s
  Pim join-prune periodic interval: 60 s
  Pim triggered-hello-delay: 5 s
  Pim version: 2
  Pim ipsec sa: disabled
  Pim neighbor-policy: disabled

**Table 1** Description of the **display default-parameter pim-dm** command output
Item	Description
PIM View Default Configurations	Indicates default configurations in the PIM view.
Hello-option dr-priority	Indicates the priority for Designated router (DR) election.
Hello-option holdtime	Indicates the time period for the neighbor to hold the reachable state.
Hello-option lan-delay	Indicates the delay in transmitting Prune messages at a shared network segment.
Hello-option neighbor-tracking	Indicates whether neighbor tracking is enabled.
Hello-option override-interval	Indicates the interval for sending Prune Override messages.
Holdtime assert	Indicates the time period for holding the Assert state.
Holdtime join-prune	Indicates the time period for holding the Join or Prune state.
Source-lifetime	Indicates the timeout period of an (S, G) entry.
State-refresh-interval	Indicates the interval for sending State-Refresh messages.
State-refresh-rate-limit	Indicates the minimum interval from when the last State-Refresh message is received to when the next State-Refresh message is received.
State-refresh-ttl	Indicates the TTL value of the State-Refresh message.
Hello periodic interval	Indicates the interval for sending Hello messages.
Join-prune periodic interval	Indicates the interval for sending Join/Prune messages.
Interface View Default Configurations	Indicates the default configurations in the interface view.
Pim bfd	Indicates whether the PIM BFD is enabled on the interface.
Pim hello-option dr-priority	Indicates the priority for DR election on the interface.
Pim hello-option holdtime	Indicates the time period for the neighbor on the interface to hold the reachable state.
Pim hello-option lan-delay	Indicates the delay in transmitting Prune messages at the shared network segment where the interface resides.
Pim hello-option neighbor-tracking	Indicates whether neighbor tracking is enabled on the interface.
Pim hello-option override-interval	Indicates the interval for the interface to send Prune Override messages.
Pim holdtime assert	Indicates the time period for the interface to hold the Assert state.
Pim holdtime join-prune	Indicates the time period for the interface to hold the Join or Prune state.
Pim require-genid	Indicates whether the received Hello message is required to carry the Generation ID.
Pim silent	Indicates whether PIM Silent is enabled on the interface.
Pim state-refresh-capable	Indicates whether State-Refresh is enabled on the interface.
Pim timer dr-switch-delay	Indicates whether the DR switch delay is set on the interface.
Pim timer graft-retry	Indicates the interval for the interface to retransmit Graft messages.
Pim hello periodic interval	Indicates the interval for the interface to send Hello messages.
Pim join-prune periodic interval	Indicates the interval for the interface to send Join/Prune messages.
Pim triggered-hello-delay	Indicates the maximum delay for the interface to send Hello messages.
Pim version	Indicates the version of PIM enabled on the interface.
Pim ipsec sa	Indicates whether the IP Security (IPSec) is configured on the interface.
Pim neighbor-policy	Indicates whether the neighbor-policy is set on the interface.