The display fault-management command displays information about alarms, active alarms, or events.
display fault-management { alarm | active-alarm | event } [ sequence-number sequence-number ]
| Parameter | Description | Value |
|---|---|---|
| alarm | Displays information about alarms. | - |
| active-alarm | Displays information about active alarms. | - |
| event | Displays information about events. | - |
| sequence-number sequence-number | Specifies the number of an alarm, active alarm, or event. | The value is an integer ranging from 0 to 2147483647. If the value is 0, information about all alarms, active alarms, or events is displayed. |
This command is available to aid upgrade compatibility. To run this command, you must enter the complete command.
This command is replaced by the display alarm active, display alarm sync, and display event commands.
# Display information about active alarms in the system.
<sysname> display fault-management active-alarm
1/2010-5-6 20:21:51/-/hwEntityRegSuccess/0xff142811/Major/Start/ OID 1.3.6.1.4 .1.2011.5.25.129.2.1.18 Physical entity register succeeded. (EntityPhysicalIndex =18612225, BaseTrapSeverity=2, BaseTrapProbableCause=70147, BaseTrapEventType=5, EntPhysicalContainedIn=18612224, EntPhysicalName="FAN 28", RelativeResource="", ReasonDescription="FAN 28") 2/2010-5-6 20:21:51/-/hwEntityRegSuccess/0xff142811/Major/Start/ OID 1.3.6.1.4 .1.2011.5.25.129.2.1.18 Physical entity register succeeded. (EntityPhysicalIndex =18546689, BaseTrapSeverity=2, BaseTrapProbableCause=70147, BaseTrapEventType=5, EntPhysicalContainedIn=18546688, EntPhysicalName="FAN 27", RelativeResource="", ReasonDescription="FAN 27") 3/2010-5-6 20:21:51/-/hwPortPhysicalDown/0xff142822/Major/Start/ OID 1.3.6.1.4 .1.2011.5.25.129.2.5.1 Physical state of the port changed to down. (EntityPhysic alIndex=17956869, BaseTrapSeverity=3, BaseTrapProbableCause=74752, BaseTrapEvent Type=5, EntPhysicalName="GigabitEthernet0/0/0") 4/2010-5-6 20:21:52/-/hwPortPhysicalUp/0xff142823/Major/Start/ OID 1.3.6.1.4.1 .2011.5.25.129.2.5.2 Physical state of the port changes to up. (EntityPhysicalIn dex=17956869, BaseTrapSeverity=3, BaseTrapProbableCause=74752, BaseTrapEventType =5, EntPhysicalName="GigabitEthernet0/0/0") 5/2010-5-6 20:21:52/-/linkUp/0x502000/Indeterminate/Start/OID 1.3.6.1.6.3.1.1. 5.4 Interface 513 turned into UP state.